Yuba originates from English and can be literally translated as 'bathroom master'. It is a small bathroom appliance that combines multiple functions such as bathroom heating, infrared physiotherapy, bathroom ventilation, and decoration through a clever combination of a special waterproof infrared heat wave tube and a ventilation fan.
The power wiring system must be standardized
The power of the bathroom heater can reach up to 100% or more. Therefore, the power wiring for installing the bathroom heater must be waterproof, preferably multi-filament copper core wires no less than 100%. All power supplies The wiring must be installed through plastic hidden tubes in the wall, and no open wires are allowed. The power control switch of the bathroom heater must be a qualified product with a waterproof capacity or above. Especially when installing a bathroom heater in an old house, you must pay more attention to the regulations.
The thickness of the bathroom heater should not be too large
In terms of installation issues, consumers must pay attention to the thickness of the bathroom heater when purchasing, which is generally around centimeters. Because the bathroom heater needs to be installed on the roof, if you want to install the bathroom heater, you must add a roof below the roof, which is what we often call a suspended ceiling, so that the second half of the bathroom heater can be sandwiched between the two roofs. If If the bathroom heater is too thick, it will be difficult to decorate.
Should be installed in the center of the bathroom
Many families install it above the bathtub or shower, which seems to heat up quickly in winter but is a safety hazard. Because infrared radiation lamps heat up quickly, they can easily burn the human body if they are too close. The correct method should be to install the bathroom heater in the center of the top of the bathroom, or slightly close to the bathtub, which is both safe and maximizes functionality.
It is forbidden to spray water when working
Special attention should be paid when using it. Although the current bathroom heaters are all waterproof, you must not splash them with water during actual use. Although the waterproof bulbs of the bathroom heaters have waterproof properties, However, the metal accessories in the body cannot do this, that is, the metal in the body is still conductive. If water is poured on it, it will cause dangers such as power short circuit.
Avoid frequent switching and vibration
Do not frequently switch the bath heater on and off during normal use. Avoid large vibrations around the bath heater during operation, otherwise it will affect the service life of the heating foam. If any abnormality occurs during operation, stop using it immediately, and do not dismantle it for inspection by yourself. You must ask professional technicians from the after-sales service and maintenance department for inspection.
Keep the bathroom clean and dry
After taking a bath, do not turn off the bathroom heater immediately. Wait until the moisture in the bathroom is drained before turning off the bathroom heater. Also, keep the bathroom ventilated, clean and dry regularly to extend the use of the bathroom heater. life.
News